Skirt to Top Tutorial

I've had this skirt sitting around and collecting dust for a couple years, so I finally decided to do something with it. This was pieced together in a rather improvised fashion, with numerous mistakes, so please let me know if this tutorial makes no sense.

1. I started with an ankle-length velvet pencil skirt. It wasn’t exactly ugly, but it certainly wasn’t unique or steampunk. This needed to be fixed.

2. Cut the bottom third off the skirt. Hem the rough edges on the front, but keep the back as is for now.

3. Cut two strips of fabric, each about sixteen inches long, from the cut off bottom portion of the skirt. Hem all rough edges to make straps.

4.Sew the straps onto the waistband of the skirt. Trim the straps and the front of the waistband with lace.

5. Cut two pieces of fabric, each about 2x16 inches, and sew along the edges to make two long tubes. Sew these to the side of the top to make ties.

6. Take the remaining fabric and sew it to the back of the skirt, making pleats as you go. To make pleats, pinch the fabric, fold it over, and sew down the crease. 

No-Sew Floral Lace Fascinator Tutorial

1. To begin with, you’ll need a little bit of felt, a simple headband, about two yards (this may vary, depending on the size of your fascinator) of fairly wide lace, and some hot glue or textile glue.

2. Cut a circle from the felt. Mine is about two to three inches in diameter. Keep in mind that, due to the width of the lace, the finished product will be a few inches larger than the felt circle.

3. Pin the inner edge of the lace to the outer edge of the felt circle. It's okay if the lace warps from  being pinned to a round surface; this gives it a more realistic petal-like shape.

4. Remove the pins one by one, replacing each with a dab of glue. Allow the glue to dry.

5. Repeat this process a little bit at a time, gluing the lace in a tight spiral pattern. As you near the center, you may want to fold the lace in half to give a more rounded effect. Continue until you have made a rose shape.

6. Glue the fascinator to the headband. Cut another circle of felt, and then glue it on so that the headband is sandwiched between the two felt layers.

7. Wait for the glue to dry, and it’s done.

Ribbon Choker Tutorial

            So since I was gone all last week, I’m doing more posts than usual for a little while. Here’s a tutorial for a basic choker made from a ribbon. I like to think of this as the neo-Victorian equivalent of the punk dog collar. It’s quite versatile and looks great when layered with a pendant or longer necklace.

1. Cut a piece of ribbon about two inches longer than the circumference of your neck.

2. Fold over the end of the ribbon. 

3. Push down on the fold to make two flaps

4. Sew it down, making sure to leave the two flaps separate. Iron them flat.

5. Repeat steps two through four on the other end.

6. Place the two hook clasps between the flaps on one end and hand sew into place. Repeat on the other end with the eyes.

7. Sew on any ornamentation, beads, etc, if desired. 

Here's a finished one, layered with a cameo necklace.